Free A4 samples  ·  MOQ 2 tons  ·  MTC with every coil
Products / Whiteboard Surface

01 / Whiteboard surface

Double-Coated Magnetic Whiteboard Surface

Two coats. Magnetic steel. No ghosting.

Magnetic whiteboard surface steel with a base coat for adhesion and a top coat for the writing surface — applied and cured in one continuous pass, total dry film 22–24 µm. This is the panel board factories frame, and the only part the end user touches: it decides whether the board still erases clean in year three, or ghosts in year one.

Thickness
0.22 / 0.25 mm std
Coating build
Primer + top coat
Total DFT
22 – 24 µm
Magnetic
Yes — steel core
Double-coated whiteboard surface steel coil on pallet
FIG. 01 — Whiteboard surface coil, 0.25 mm

Why buyers specify it

What a coating line can promise — and prove.

01
Cured, not just dried

The top coat is baked at line temperature, so it hardens into the surface instead of sitting on top of it — the difference between erasing cleanly and smearing.

02
Still flat after cutting

Tension-levelled substrate keeps its flatness through slitting, shearing and framing — no oil-canning on a finished board.

03
Magnet pull you can feel

A cold-rolled steel core holds steady across the full sheet — no dead corners, so documents stay up where the user puts them.

04
No shade drift between coils

Coating weight and colour are measured per batch and logged, so the coil you reorder in March matches the one you framed in January.

Safety & compliance — SGS tested

Safe where it matters most — schools and kids' rooms.

EN 71-2:2020 · Flammability
PASS
EN 71-3:2019+A2:2024 · 19 elements
PASS
EU RoHS 2015/863 · 10 substances
PASS

The whiteboard coating was tested by SGS, the world's leading inspection, verification and testing company: flammability to EN 71-2:2020, and migration of 19 soluble heavy metals (including lead, cadmium and mercury) to EN 71-3:2019+A2:2024, Category III — every result passes, with lead and cadmium not detected at all. The coating also clears the EU RoHS Directive (EU) 2015/863 hazardous-substance screening. Test reports are public: EN 71 report, Apr 2025 (PDF) · RoHS report, Oct 2022 (PDF).

Full specification

SubstrateGalvanised · cold-rolled
Thickness0.22 / 0.25 mm standard · 0.11 – 0.40 mm on request
Coating buildPrimer + top coat
Total dry film22 – 24 µm
Surface finishGloss / matte
Coil width600 – 1250 mm
Zinc layer20 – 80 g/m² (customised)
Coil weight2 t
Lead time25 days

Available options

Colour

Standard white, or matched to your RAL on request.

Packing

Eye-to-sky coil on wooden pallet, or cut-to-size sheets on export pallets with edge protectors.

Terms

FOB Tianjin, 25 days after deposit, MTC with every coil. MOQ 2 t.

Send a board spec. We quote within two working days.

MOQ 2 T · FREE A4 SAMPLE · MTC WITH EVERY COIL
Request a Quote