Quality Control
Tested on the line.
Checked before it ships.
Anyone can write “high quality” on a website. We would rather list what we measure. Eleven routine checks run against every production batch, and the paperwork travels with the coil.
On the line
What we actually test, batch by batch.
No stock photos. These are our own gauges, ovens and rigs at the Bazhou plant — every shot below is one of the eleven routine checks, run against every production batch.
Dry film is read with a MikroTest gauge against the ordered 22–24 µm, coat by coat — on white and green panels alike, and every reading is logged.
Green and black boards are written on with standard chalk straight off the line.
The same marks are wiped with a standard eraser — even erasing, consistent tone.
Whiteboard surfaces run repeated write-and-wipe cycles — clean erasure, no ghosting build-up.
100 double rubs with MEK solvent. The film stays intact and unsoftened — the direct check on baking temperature.
A 3nh colorimeter reading is taken on every batch and matched against the retained master sample.
Surface gloss is read with a 3nh gloss meter — high-gloss and matte panels checked separately.
91.6 GU on white — right inside the 88–95 GU band we publish on the spec sheet.
A circle-method tester scores the film; any lift or flaking fails the batch.
Steel-wool abrasion cycles confirm the surface survives daily writing and erasing.
A 1 mm grid is cut into the film — the pass/fail check for paint-to-steel bonding.
The grid is taped and pulled. No squares lift — or the panel doesn’t ship.
A written whiteboard panel is loaded into the oven and aged at 45 °C for 72 hours.
After the cycle the writing must still erase cleanly — residuals never burn in.
Samples are folded twice on the rig — the harshest check on film flexibility.
Tape pressed over the fold must show no paint loss or cracking.
The paperwork
What ships with your order.
A test result you cannot see is a promise, not a fact. Every shipment carries the documents that turn our claims into your records.
Issued per coil, with measured zinc and coating weights. The numbers travel with the goods.
Results of the routine tests above, filed per production batch and available on request.
A colour and surface sample of every batch is kept, so later orders are matched against the original — not a memory.
Packing, labelling and loading documented before the container door is sealed.
SGS, BV or your own inspector is welcome before shipment — we book access, not excuses.
Test the surface in your own line before you commit. A4 panels are cut from current production and sent on request.
Certification
ISO 9001:2015 certified plant.
Our Bazhou coating plant operates under a certified quality management system — audited by an accredited body, endorsed by CNAS and IAF, and re-audited every year.
VIEW FULL CERTIFICATE · PDF
Compliance & safety testing
Independent SGS safety reports — published, not promised.
Beyond the eleven in-house checks, our whiteboard surface coating has been tested by SGS-CSTC (Xiamen Branch) against the two standards buyers ask about most: European toy-safety limits and EU RoHS. Both reports are public — download the originals below.